Ground anchor strap installation instructions. Take 3’ strap and loop around trunk and limb of tree.

Ground anchor strap installation instructions. The performance of ground anchors, the safety factor of using the ground anchor and the success rate that one has of recovering there vehicle in a bog situation is marginally due to the ability of the user understanding hot to correctly deploy the ground anchor for maximum performance. Aug 7, 2009 · Tighten slotted ten-sioning bolt 5 full turns minimum until all slack in strap is removed (Correct anchor must be installed as per ground anchor manufacturer's installation instructions). Pull strap past bolt head and cut strap so that 12-15 inches of strap are available to wrap onto the slotted bolt. OTI ANCHOR PIER INSTALLATION PREPARATION INSTRUCTIONS Determine what anchor to use for the soil conditions at the desired location of installation. REPLACE THE PLUGS – they will keep debris from the bolt holes during Install anchor to +/- 2/3 depth, then install stabilizer vertically, within 3”-4” of anchor shaft, parallel to wall of home. Ensure ground anchor size matches size of goal pole and package label colors match: 4”= G2440 (Green), 5”= G2550 (Yellow), 6”= G2660 (Blue) Step 1: Locate and unpack ground anchor. com Insert slotted bolt into anchor head, attach loosely. Thread ends of the strap through opening of buckle and knot to secure. STEP 5: Refer to anchor and strapping installation instructions for proper installation to anchor and strap. Prior to installing any ground anchor model, the soil must be tested (with a Soil Test Probe) in order to match approved ground anchor model with site soil class.